# Measuring Line Parameters with an HETG/ACIS-S Spectrum

Sherpa Threads (CIAO 4.13 Sherpa v1)

## Overview

#### Synopsis:

After having created or downloaded a set of PHA2 and response files (RMFs and ARFs), for a HETG/ACIS-S observation, perform a simple fit to one of the line features present in the spectrum. This thread takes the user through a calculation of the error bars on the line normalizations, positions, and widths, and shows how to calculate the line equivalent widths.

For those wishing to perform their analysis with XSPEC, the PHA2 file must first be split into individual type 1 PHA files, and then grouped to increase the signal-to-noise in each spectral bin. The Grouping a Grating Spectrum CIAO thread shows how to do this, and the procedure is also included within this thread.

#### Run this thread if:

You are working with a HETG/ACIS-S data set, and want to begin a simple analysis of the data.

**Related Links:**

**Last Update:** 22 Dec 2020 -
Updated for CIAO 4.13: adjusting the thread to change when the
MEG data was removed and the details of the filtering and
grouping; make use of changes to the plot support in CIAO
4.13; add examples of plot_model_component;
and simplify the flux calculation by taking advantage of the
model parameter added in Sheria 4.12.1.

## Contents

**Data Preparation****Load the Spectrum and Responses****Filtering and Grouping the Data****Defining the Source Models****Fitting****Adding Lines to the Model and Fitting Again****Examine the Fit Results****Calculate the Equivalent Width of a Line and Continuum Flux****Scripting It****Summary****History**-
**Images**- Figure 1: Plot of the +1 and -1 HEG and MEG spectra
- Figure 2: Plot of the background components for the -1 HEG spectrum
- Figure 3: Continuum Fit to the Data
- Figure 4: Adding a single line
- Figure 5: Restricting to just the HEG data
- Figure 6: Fit and Residuals to the Spectral Line
- Figure 7: HEG +/-1 Order Two Gaussian Component Fit
- Figure 8: The line components to the HEG -1 order fit

## Data Preparation

This thread makes use of archival data products for Vela X-1, downloaded from TGcat. They were obtained by performing a "Search by Name" on Vela X-1 (using the SIMBAD name resolver), then choosing "view → file table" for the target, and clicking the download arrow next to each filename. These files were unzipped and placed in the directory in which the data analysis is to be performed.

Note that we are not considering any background files. For HETG/ACIS-S observations, the background is suppressed by the process of order sorting. That is, an event at a given location along the grating arms must fall into a narrow range of energies (as determined by the CCD) in order for it to be considered a valid dispersed photon. Most background events do not meet these "order sorting" criteria. For this, and many other HETG/ACIS-S observations, the first simple analysis can be performed without reference to the background. (Detailed analysis of low S/N spectra likely would require proper consideration of the background. See the Fitting Grating Data thread for an example of analysis including background data).

Those using either *Sherpa* or
ISIS
to perform their analysis can use the data files directly in
the analysis; skip to the "Load the
Spectrum and Responses" section.

XSPEC users, however, must split and group the spectra before the analysis as described here.

## Load the Spectrum and Responses

Start a *Sherpa* session:

unix% sherpa ----------------------------------------------------- Welcome to Sherpa: CXC's Modeling and Fitting Package ----------------------------------------------------- Sherpa 4.13.0 Python 3.8.2 (default, Mar 25 2020, 17:03:02) Type 'copyright', 'credits' or 'license' for more information IPython 7.19.0 -- An enhanced Interactive Python. Type '?' for help. IPython profile: sherpa Using matplotlib backend: Qt5Agg sherpa>

We begin by reading the PHA2 file that contains the grating spectra.
This file contains 12 spectra, 3 spectral orders each for both
positive and negative order HEG and MEG spectra. They are stored in
the order: HEG -3, -2, -1, 1, 2, 3; MEG -3, -2, -1, 1, 2, 3. By
default, *Sherpa* will read in all 12 spectral files in this order.

We are only interested, however, in the first-order spectra (positive and negative); therefore, we use a Data Model-type filter to select the third and fourth, ninth, and tenth rows of the PHA2 file (HEG -/+1 and MEG -/+1, respectively).

sherpa> load_pha("pha2[#row=3,4,9,10]") WARNING: systematic errors were not found in file 'pha2[#row=3,4,9,10]' statistical errors were found in file 'pha2[#row=3,4,9,10]' but not used; to use them, re-read with use_errors=True read background_up into a dataset from file pha2[#row=3,4,9,10] read background_down into a dataset from file pha2[#row=3,4,9,10] Multiple data sets have been input: 1-4

Alternatively, one could use a filter to select all negative and postitive first-order spectra via the TG_M keyword:

sherpa> load_pha("pha2[TG_M=-1,1]")

The load_pha call sets the "file name" of each dataset to the same string, which is not helpful in the plots we will show, so let's set the name field to match the dataset:

sherpa> get_data(1).name = "pha2[#row=3]" sherpa> get_data(2).name = "pha2[#row=4]" sherpa> get_data(3).name = "pha2[#row=9]" sherpa> get_data(4).name = "pha2[#row=10]"

We now read in the associated ARF files and assign them to their corresponding data sets,

sherpa> load_arf(1, "heg_-1.arf") sherpa> load_arf(2, "heg_1.arf") sherpa> load_arf(3, "meg_-1.arf") sherpa> load_arf(4, "meg_1.arf")

then do the same for the RMF files.

sherpa> load_rmf(1, "heg_-1.rmf") sherpa> load_rmf(2, "heg_1.rmf") sherpa> load_rmf(3, "meg_-1.rmf") sherpa> load_rmf(4, "meg_1.rmf")

## Filtering and Grouping the Data

For the purposes of this analysis, we are interested in fitting the line near 6.4 keV. We restrict the energy range to 5-7 keV for all four spectra using the notice command, since the same energy filter is to be applied to all data set IDs; the notice_id command is available for filtering data sets individually.

sherpa> notice(5., 7.) sherpa> show_filter() Data Set Filter: 1 5.0019-6.9998 Energy (keV) Data Set Filter: 2 5.0019-6.9998 Energy (keV) Data Set Filter: 3 5.0044-6.9949 Energy (keV) Data Set Filter: 4 5.0044-6.9949 Energy (keV)

*Sherpa* allows one to bin the spectra during the analysis
session; see the *Sherpa* thread
*Changing the grouping scheme of a data set
within Sherpa* for details.

We bin each of the spectra to have a minimum of 20 counts per energy channel, and to restrict this analysis to the previously-noticed energy range (since the same task is run for all four datasets we use a Python loop):

sherpa> for i in range(1, 5): ...: mask = get_data(i).mask ...: group_counts(i, 20, tabStops=~mask)

The spectra can all be plotted in the same figure using the plot command (chosen to use a logarithmc scale for the Y axis thanks to the set_ylog call). The results are shown in Figure 1:

sherpa> set_ylog('data') sherpa> plot("data", 1, "data", 2, "data", 3, "data", 4)

### Figure 1: Plot of the +1 and -1 HEG and MEG spectra

Note that associated background spectra (two each for each spectrum, one from either side of the gratings arm) have been read in with the source spectra. We can see this by using list_bkg_ids for one of the datasets:

sherpa> list_bkg_ids(1) [1, 2]

For this particular dataset the background signal is low (Figure 2):

sherpa> ungroup(1, bkg_id=1) sherpa> ungroup(1, bkg_id=2) sherpa> plot('bkg', 1, 1, 'bkg', 1, 2, yerrorbars=False)

### Figure 2: Plot of the background components for the -1 HEG spectrum

The scaling factor - the number we multiply the background counts by to subtract it from the source region - is calculated by get_bkg_scale:

sherpa> get_bkg_scale(1, bkg_id=1) 0.12441436912310064 sherpa> get_bkg_scale(1, bkg_id=2) 0.12441436912310064

So we can see that in this case the background contribution is small (we should check each dataset individually, but for this source the conclusion holds). Now, unless the subtract command is called, or unless one creates a background model, they will not be part of the fitting process but will cause a warning message to be displayed if not used:

WARNING: data set 1 has associated backgrounds, but they have not been subtracted, nor have background models been set

To avoid this we remove the background components, which requires using a "low-level" set of commands:

sherpa> for i in range(1, 5): ...: d = get_data(i) ...: d.delete_background(2) ...: d.delete_background(1)

The data sets currently being considered in the analysis can be viewed with the show_data, show_bkg, and show_all commands. For example, we can list the datasets to be fitted with the list_data_ids command:

```
sherpa> print(list_data_ids())
[1, 2, 3, 4]
```

## Defining the Source Models

We will first fit a broad continuum to the spectra, without any lines. The XSPEC power-law model (xspowerlaw) is chosen for the continuum. It is assigned as the source for data set 1 and given the model name powr; the model name is then used to assign the same source model to the other data sets:

sherpa> set_source(1, xspowerlaw.powr) sherpa> set_source(2, powr) sherpa> set_source(3, powr) sherpa> set_source(4, powr) sherpa> show_source() Model: 1 xspowerlaw.powr Param Type Value Min Max Units ----- ---- ----- --- --- ----- powr.PhoIndex thawed 1 -2 9 powr.norm thawed 1 0 1e+24 Model: 2 xspowerlaw.powr Param Type Value Min Max Units ----- ---- ----- --- --- ----- powr.PhoIndex thawed 1 -2 9 powr.norm thawed 1 0 1e+24 Model: 3 xspowerlaw.powr Param Type Value Min Max Units ----- ---- ----- --- --- ----- powr.PhoIndex thawed 1 -2 9 powr.norm thawed 1 0 1e+24 Model: 4 xspowerlaw.powr Param Type Value Min Max Units ----- ---- ----- --- --- ----- powr.PhoIndex thawed 1 -2 9 powr.norm thawed 1 0 1e+24

## Fitting

The fit statistic is set to be χ^{2} with the
data counts acting as the variance (i.e., a Gaussian approximation to
simple Poisson statistics). All data sets are fit simultaneously.

sherpa> set_stat("chi2datavar") sherpa> fit() Datasets = 1, 2, 3, 4 Method = levmar Statistic = chi2datavar Initial fit statistic = 8.37325e+08 Final fit statistic = 393.88 at function evaluation 112 Data points = 78 Degrees of freedom = 76 Probability [Q-value] = 2.04873e-44 Reduced statistic = 5.18263 Change in statistic = 8.37325e+08 powr.PhoIndex -1.31318 +/- 0.296211 powr.norm 2.19841e-05 +/- 1.14874e-05

At any time, the results of the last fit can be displayed using the show_fit command. The fit yields the following results:

sherpa> show_fit() Optimization Method: LevMar name = levmar ftol = 1.1920928955078125e-07 xtol = 1.1920928955078125e-07 gtol = 1.1920928955078125e-07 maxfev = None epsfcn = 1.1920928955078125e-07 factor = 100.0 numcores = 1 verbose = 0 Statistic: Chi2DataVar Chi Squared with data variance. The variance in each bin is estimated from the data value in that bin. If the number of counts in each bin is large, then the shape of the Poisson distribution from which the counts are sampled tends asymptotically towards that of a Gaussian distribution, with variance sigma(i)^2 = N(i,S) + [A(S)/A(B)]^2 N(i,B) where N is the number of on-source (and off-source) bins included in the fit. The background term appears only if an estimate of the background has been subtracted from the data. A(B) is the off-source "area", which could be the size of the region from which the background is extracted, or the length of a background time segment, or a product of the two, etc.; and A(S) is the on-source "area". These terms may be defined for a particular type of data: for example, PHA data sets A(B) to `BACKSCAL * EXPOSURE` from the background data set and A(S) to `BACKSCAL * EXPOSURE` from the source data set. See Also -------- Chi2Gehrels, Chi2ModVar, Chi2XspecVar Fit:Datasets = 1, 2, 3, 4 Method = levmar Statistic = chi2datavar Initial fit statistic = 8.37325e+08 Final fit statistic = 393.88 at function evaluation 112 Data points = 78 Degrees of freedom = 76 Probability [Q-value] = 2.04873e-44 Reduced statistic = 5.18263 Change in statistic = 8.37325e+08 powr.PhoIndex -1.31318 +/- 0.296211 powr.norm 2.19841e-05 +/- 1.14874e-05

The results of these fits can then be plotted. Here we choose to display just the data and fits, not the residuals, and overplot on the same plot for easy comparion, resulting in Figure 3:

sherpa> plot_fit(1, alpha=0.5, ylog=False) sherpa> plot_fit(2, alpha=0.5, overplot=True) sherpa> plot_fit(3, alpha=0.5, overplot=True) sherpa> plot_fit(4, alpha=0.5, overplot=True)

### Figure 3: Continuum Fit to the Data

## Adding Lines to the Model and Fitting Again

We start by creating a Gaussian model component for the
feature at 6.4 keV, named g1 and set the Gaussian
normalization to 10^{-4}.

sherpa> one_line = powr + xsgaussian.g1 sherpa> g1.norm = 1e-4 sherpa> for i in range(1, 5): ...: set_source(i, one_line)

which we can fit to all datasets:

sherpa> fit() Datasets = 1, 2, 3, 4 Method = levmar Statistic = chi2datavar Initial fit statistic = 425.303 Final fit statistic = 70.9071 at function evaluation 58 Data points = 78 Degrees of freedom = 73 Probability [Q-value] = 0.547581 Reduced statistic = 0.97133 Change in statistic = 354.396 powr.PhoIndex -0.679098 +/- 0.324298 powr.norm 6.32886e-05 +/- 3.59468e-05 g1.LineE 6.39408 +/- 0.00123752 g1.Sigma 0.0113278 +/- 0.00174466 g1.norm 0.00018204 +/- 1.02979e-05

The improvement in the fit is shown in Figure 4:

sherpa> plot('fit', 1, 'fit', 2, 'fit', 3, 'fit', 4)

### Figure 4: Adding a single line

The MEG spectra do not have very good statistics in the region of interest; therefore, we delete these data sets from the current session before proceeding with the fits.

sherpa> delete_data(3) sherpa> delete_data(4) sherpa> print(list_data_ids()) [1, 2]

We refit, to make sure we have the best-fit for just this data:

sherpa> fit() Datasets = 1, 2 Method = levmar Statistic = chi2datavar Initial fit statistic = 57.338 Final fit statistic = 56.3026 at function evaluation 25 Data points = 54 Degrees of freedom = 49 Probability [Q-value] = 0.220493 Reduced statistic = 1.14903 Change in statistic = 1.0354 powr.PhoIndex -0.664451 +/- 0.384379 powr.norm 6.32152e-05 +/- 4.28647e-05 g1.LineE 6.39384 +/- 0.00122531 g1.Sigma 0.0111641 +/- 0.00170327 g1.norm 0.000189783 +/- 1.15816e-05

We can see how this plot (Figure 5) compares to Figure 4:

sherpa> plot('fit', 1, 'fit', 2)

### Figure 5: Restricting to just the HEG data

## Examine the Fit Results

We see
that we have a good fit to the spectra, including a line
component. We can now explore the errors in the line
parameters using the conf
command to run the *Sherpa* confidence
routines. As is common in X-ray astronomy, we search for
the 90% confidence level values for one interesting
parameter (i.e., the variation of the parameter of interest
that when refitting the remaining unfrozen parameters yields
a change in the χ^{2} value of 2.706). This corresponds to
an error bar of 1.64σ (1σ being the 68% confidence
interval), and set this as the default error value in the
confidence routines via the
set_conf_opt command. We then
run conf for the three parameters of each of the
Gaussian model components: line energy, line width, and line
normalization.

sherpa> set_conf_opt("sigma", 1.64) sherpa> conf(g1.linee, g1.sigma, g1.norm) g1.LineE lower bound: -0.00202748 g1.norm lower bound: -1.90041e-05 g1.Sigma lower bound: -0.00307553 g1.LineE upper bound: 0.00201722 g1.norm upper bound: 1.90147e-05 g1.Sigma upper bound: 0.00274967 Datasets = 1, 2 Confidence Method = confidence Iterative Fit Method = None Fitting Method = levmar Statistic = chi2datavar confidence 1.64-sigma (89.8995%) bounds: Param Best-Fit Lower Bound Upper Bound ----- -------- ----------- ----------- g1.LineE 6.39384 -0.00202748 0.00201722 g1.Sigma 0.0111641 -0.00307553 0.00274967 g1.norm 0.000189783 -1.90041e-05 1.90147e-05

We see that the line position is determined to approximately 0.002
keV, i.e., an equivalent velocity of 80 km/s. This is essentially the
*limit of the HEG spectral resolution*.

The line width is <0.011 keV (i.e., <560 km/sec), but is likely >0.006 keV (i.e., >280 km/sec). Again, these are near the limits of the capabilities of the HEG detector, but far better than the limits one could place with CCD detectors.

Finally, we see that the line normalization is determined to within +/-10%.

We can now plot the data, fits, and residuals (i.e., four separate plots), all on one figure. Since the plot titles overlap each other, and other plot elements, Matplotlib commands are used to clear the title for the bottom two plots (Figure 6).

sherpa> plot("fit", 1, "fit", 2, "delchi", 1, "delchi", 2) sherpa> for ax in plt.gcf().axes[2:]: ...: ax.set_title('')

### Figure 6: Fit and Residuals to the Spectral Line

To explore whether adding another, broader line component changes the results any, we create a second Gaussian component, and call it g2. We then define a model consisting of a power-law plus two Gaussian components, and apply it to both data sets. We change the normalization of the second Gaussian to be somewhat smaller, then fit the data.

sherpa> full_model = one_line + xsgaussian.g2 sherpa> g2.norm = 1.e-4 sherpa> set_model(1, full_model) sherpa> set_model(2, full_model) sherpa> fit() Datasets = 1, 2 Method = levmar Statistic = chi2datavar Initial fit statistic = 155.024 Final fit statistic = 46.6665 at function evaluation 341 Data points = 54 Degrees of freedom = 46 Probability [Q-value] = 0.444864 Reduced statistic = 1.01449 Change in statistic = 108.358 powr.PhoIndex 1.87358 +/- 2.07566 powr.norm 0.00435071 +/- 0.0149659 g1.LineE 6.39391 +/- 0.00123494 g1.Sigma 0.00996355 +/- 0.00192428 g1.norm 0.000181852 +/- 1.20256e-05 g2.LineE 6.50072 +/- 0.0745407 g2.Sigma 0.357067 +/- 0.150552 g2.norm 0.000128375 +/- 9.45378e-05 sherpa> conf() g1.Sigma lower bound: -0.0035222 g1.norm lower bound: -1.96287e-05 g1.LineE lower bound: -0.002048 g1.Sigma upper bound: 0.00297262 g2.LineE lower bound: -0.131233 powr.norm lower bound: -0.00421581 g1.LineE upper bound: 0.00203515 g2.Sigma lower bound: -0.163709 g1.norm upper bound: 1.96349e-05 powr.PhoIndex lower bound: -2.06799 powr.PhoIndex upper bound: 5.18098 g2.LineE upper bound: 0.168003 g2.norm lower bound: -8.79802e-05 ^[[Ag2.norm upper bound: 0.000227131 g2.Sigma upper bound: 0.31987 powr.norm +: WARNING: The confidence level lies within (1.667857e-01, 1.667808e-01) powr.norm upper bound: 0.162433 Datasets = 1, 2 Confidence Method = confidence Iterative Fit Method = None Fitting Method = levmar Statistic = chi2datavar confidence 1.64-sigma (89.8995%) bounds: Param Best-Fit Lower Bound Upper Bound ----- -------- ----------- ----------- powr.PhoIndex 1.87358 -2.06799 5.18098 powr.norm 0.00435071 -0.00421581 0.162433 g1.LineE 6.39391 -0.002048 0.00203515 g1.Sigma 0.00996355 -0.0035222 0.00297262 g1.norm 0.000181852 -1.96287e-05 1.96349e-05 g2.LineE 6.50072 -0.131233 0.168003 g2.Sigma 0.357067 -0.163709 0.31987 g2.norm 0.000128375 -8.79802e-05 0.000227131

The inclusion of the second line component does not greatly affect the conclusions about the parameters of the first line component. The line centroid is the same with comparable error bars. The uncertainty on the line width has increased slightly, as has the uncertainty on the line normalization.

We plot the results for this fit in a manner identical to the one Gaussian line fit (Figure 7).

sherpa> plot("fit", 1, "fit", 2, "delchi", 1, "delchi", 2) sherpa> for ax in plt.gcf().axes[2:]: ...: ax.set_title('')

### Figure 7: HEG +/-1 Order Two Gaussian Component Fit

We can use the plot_model_component function to display the individual components of the fit, lathough for PHA data it requires manually including the instrument response using get_response as shown below:

sherpa> rsp1 = get_response(1) sherpa> plot_fit(1) sherpa> plot_model_component(1, rsp1(g1), overplot=True) sherpa> plot_model_component(1, rsp1(g2), overplot=True) sherpa> plot_model_component(1, rsp1(powr), overplot=True) sherpa> plt.ylim(1e-4, 1e-1)

### Figure 8: The line components to the HEG -1 order fit

Given that the extra component adds little to the description of the data, we drop it from the model and refit the data with a single line, resulting in the same parameters from before.

sherpa> set_model(1, one_line) sherpa> set_model(2, one_line) sherpa> fit() Datasets = 1, 2 Method = levmar Statistic = chi2datavar Initial fit statistic = 115.157 Final fit statistic = 56.3026 at function evaluation 93 Data points = 54 Degrees of freedom = 49 Probability [Q-value] = 0.220493 Reduced statistic = 1.14903 Change in statistic = 58.8548 powr.PhoIndex -0.664451 +/- 0.384379 powr.norm 6.32152e-05 +/- 4.28646e-05 g1.LineE 6.39384 +/- 0.00122531 g1.Sigma 0.0111641 +/- 0.00170327 g1.norm 0.000189783 +/- 1.15816e-05

## Calculate the Equivalent Width of a Line and Continuum Flux

Rather than merely presenting the line normalizations, we
can instead calculate the line equivalent width. The line
equivalent width is an often used measure for the line
strength relative to the underlying continuum. *Sherpa* has
a function for evaluating the equivalent width,
eqwidth. The required inputs are the
source model *absent* the line feature of interest and the
source model *with* the line feature of interest.

Optionally, the data set number for which the equivalent width will be calculated can also be given as an input, but here as we apply the same model and parameters to both data sets, this is not necessary. There are also optional lo and hi arguments for restricting the calculation of the equivalent width to a subset of the full energy or wavelength range of a data set.

sherpa> print(1000 * eqwidth(powr, powr + g1)) 875.0804657620754

The units of the equivalent width are the same as the units of the x-axis, in this case, keV. Thus the line equivalent width is ~875 eV, which indicates a very strong line. That is, there is as nearly as much flux in the line as there is in the continuum over the 6.0-7.0 keV region.

We can verify this by calculating fluxes directly, using the
calc_photon_flux and
calc_energy_flux commands. We first
calculate these fluxes from the full model (continuum plus
line) over just the 6.0-7.0 keV range. The returned fluxes are
in units of photons/cm^{2}/sec and
ergs/cm^{2}/sec, respectively.

sherpa> pflux_all = calc_photon_flux(6., 7.) sherpa> eflux_all = calc_energy_flux(6., 7.) sherpa> print(pflux_all) 0.0004089963758366319 sherpa> print(eflux_all) 4.2300654736679066e-12

We can calculate the flux of just the gaussian line, taking advantage of the model argument added in CIAO 4.12.1:

sherpa> pflux_g1 = calc_photon_flux(6., 7., model=g1) sherpa> eflux_g1 = calc_energy_flux(6., 7., model=g1) sherpa> print(pflux_g1) 0.00018978312975168732 sherpa> print(eflux_g1) 1.944150619110222e-12

Over this one keV bandwidth, the line contributes a fraction,

sherpa> print(pflux_g1 / (pflux_all - pflux_g1)) 0.8657466332036653

to the photon flux. This is approximately consistent with the equivalent width calculation of 875 eV.

## Scripting It

The file fit.py is
a Python script which performs the primary commands used
above; it can be executed by typing %run -i fit.py
on the *Sherpa* command line.

The *Sherpa* script command may be used
to save *everything* typed on the command line in a
*Sherpa* session:

sherpa> script(filename="sherpa.log", clobber=False)

(Note that restoring a *Sherpa* session from such a file
could be problematic since it may include syntax errors,
unwanted fitting trials, et cetera.)

## Summary

As shown above, working with gratings spectra is fundamentally no
different than working with CCD spectra. Aside from the fact that
gratings data will often begin with a PHA2 file containing multiple
spectra, rather than a type 1 PHA file containing a single spectrum,
the analysis paths can be very much the same for both types of
spectra. (If one is performing analysis in either *Sherpa* or ISIS, the
PHA2 file can be used directly, whereas for XSPEC one has to use the
intermediate step of creating type 1 PHA files in order to be able to
bin the data.) The data are read in, response matrices are assigned,
models are defined and fit, and error bars on the parameters are
determined. Line fluxes and equivalent widths can be calculated
easily. Gratings spectra can even be slightly less complicated than
CCD spectra in that ACIS-S/HETG spectra often do not require a
background. (Again, order sorting of the spectra often ensures that
the background is negligible.)

## History

01 Apr 2009 | new for Sherpa 4.1 |

11 Jan 2010 | updated for CIAO 4.2 |

13 Jul 2010 | updated for CIAO 4.2 Sherpa v2: removal of S-Lang version of thread. |

22 Jan 2012 | reviewed for CIAO 4.4 (no changes) |

13 Dec 2012 | updated for CIAO 4.5: group commands no longer clear the existing data filter |

10 Dec 2013 | updated for CIAO 4.6: updated fit results and screen output |

27 Feb 2015 | updated for CIAO 4.7, no content change |

14 Dec 2015 | updated for CIAO 4.8, no content change |

10 Nov 2016 | updated for CIAO 4.9, no content change, updated fit results. |

30 May 2018 | updated for CIAO 4.10, no content change |

11 Dec 2018 | reviewed for CIAO 4.11, revised screen output |

13 Dec 2019 | Updated for CIAO 4.12: use Matplotlib rather than ChIPS for plotting; updated the code in several places to take advantage of Python capabilities (e.g. looping over variables rather than manually typing values). |

22 Dec 2020 | Updated for CIAO 4.13: adjusting the thread to change when the MEG data was removed and the details of the filtering and grouping; make use of changes to the plot support in CIAO 4.13; add examples of plot_model_component; and simplify the flux calculation by taking advantage of the model parameter added in Sheria 4.12.1. |